ClicOn No Holes Dash Mount for Ford Mondeo 15-17

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 605078
 

ClicOn No Holes Right Hand Dash Mount for Ford Mondeo 15-17

Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read the instructions and look at the pictures before installing the ClicOn.

 

1. Insert the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap. 
 
2. 2. Insert the angled lower edge of the ClicOn into the gap next to the gap opener. Note the cutouts. 
 
3. Press the ClicOn upward/forward so the angled lower edge goes all the way into the gap. Feel, and if necesary adjust the ClicOn sideways, so the cutouts goes into position. Insert the angled upper edge of the ClicOn into the gap above the frame surrounding the air vent. Remove the gap opener. 
 
4. The ClicOn is in place.

Please read the instructions and look at the pictures before installing the ClicOn.

 

1. Insert the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap. 
 
2. 2. Insert the angled lower edge of the ClicOn into the gap next to the gap opener. Note the cutouts. 
 
3. Press the ClicOn upward/forward so the angled lower edge goes all the way into the gap. Feel, and if necesary adjust the ClicOn sideways, so the cutouts goes into position. Insert the angled upper edge of the ClicOn into the gap above the frame surrounding the air vent. Remove the gap opener. 
 
4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount