ClicOn No Holes Dash Mount for Ford Mondeo 12-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654995
 

ClicOn Angled Mount - Only For Business X for Ford Mondeo 12-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Ford Mondeo 12-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn mount. This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Peel off the adhesive tape cover on Part 1.  Press the angled edge on Part 1 into the gap next to the gap opener.

 

2. Press Part 1 forward/leftward so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches to the dashboard. Remove the gap opener.

 

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

 

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn mount. This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Peel off the adhesive tape cover on Part 1.  Press the angled edge on Part 1 into the gap next to the gap opener.

 

2. Press Part 1 forward/leftward so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches to the dashboard. Remove the gap opener.

 

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

 

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount