ClicOn No Holes Dash Mount for Nissan Qashqai 14-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654993
 

ClicOn Centre Mount for Nissan Qashqai 14-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Nissan Qashqai 14-20
Nissan X-Trail 14-20




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read the instructions and look at the pictures before installing the ClicOn.

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent panel and the dashboard overhang, to widen the gap. Remove the adhesive tape cover on the ClicOn.

 

2. Press the lower edge of the ClicOn into the gap dividing the center console. Press the lower edge all the way in to the gap at the same time as you press the upper part of the ClicOn upward/forward.

 

3. Hook the angled upper edge of the ClicOn into the gap next to the gap opener. Remove the gap opener.

 

4. The ClicOn is in place.

.

Please read the instructions and look at the pictures before installing the ClicOn.

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent panel and the dashboard overhang, to widen the gap. Remove the adhesive tape cover on the ClicOn.

 

2. Press the lower edge of the ClicOn into the gap dividing the center console. Press the lower edge all the way in to the gap at the same time as you press the upper part of the ClicOn upward/forward.

 

3. Hook the angled upper edge of the ClicOn into the gap next to the gap opener. Remove the gap opener.

 

4. The ClicOn is in place.

.

Contains 1 x vehicle specific dash mount