ClicOn No Holes Dash Mount for Hyundai Santa Fe 13-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654833
 

ClicOn Centre Mount for Hyundai Santa Fe 13-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided. ONLY for models with factory navigation. Dev

Fits:

Hyundai Grand Santa Fe 13-18
Hyundai Santa Fe 13-18




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Press the thin end of the enclosed gap opener into the seam/gap in the front side of the center console pillar, to widen the gap. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn.  
 
2. Place the angled edge on the left side of the ClicOn around the console pillar back edge.  
 
3. Press firmly forward on the right front side of the ClicOn so the angled edge on the right/front side flexes forward and hooks into the seam/gap above the gap opener. Press the angled edge all the way into the gap. Pull out the gap opener.  

 

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Press the thin end of the enclosed gap opener into the seam/gap in the front side of the center console pillar, to widen the gap. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn.  
 
2. Place the angled edge on the left side of the ClicOn around the console pillar back edge.  
 
3. Press firmly forward on the right front side of the ClicOn so the angled edge on the right/front side flexes forward and hooks into the seam/gap above the gap opener. Press the angled edge all the way into the gap. Pull out the gap opener.  

 

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount