ClicOn No Holes Dash Mount for Volkswagen Beetle 12-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654712
 

ClicOn Angled Mount for Volkswagen Beetle 12-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol-pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Peel off the cover of adhesive tape on the ClicOn. Press the angled edge on the right side of the ClicOn into the gap below the gap opener. Pull out the gap opener.

2. Press the gap opener into the gap in the console sidewall. Press forward on the left side of the ClicOn face plate so the ClicOn flexes forward and the angled edge hooks into the gap next to the gap opener. Pull out the gap opener.

3. Press the left part of the ClicOn firmly toward the console so the angled edge goes all the way into the gap.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol-pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Peel off the cover of adhesive tape on the ClicOn. Press the angled edge on the right side of the ClicOn into the gap below the gap opener. Pull out the gap opener.

2. Press the gap opener into the gap in the console sidewall. Press forward on the left side of the ClicOn face plate so the ClicOn flexes forward and the angled edge hooks into the gap next to the gap opener. Pull out the gap opener.

3. Press the left part of the ClicOn firmly toward the console so the angled edge goes all the way into the gap.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount