ClicOn No Holes Dash Mount for Mercedes Benz GL Class 13-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654709
 

ClicOn Angled Mount for Mercedes Benz GL Class 13-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Mercedes Benz GL-Class 13-19
Mercedes Benz GLE-Class 16-19
Mercedes Benz M-Class/ML 12-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:
Part 1: Attaching part (the smallest part)
Part 2: ClicOn face plate.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Peel off the adhesive tape cover on Part 1. Press Part 1 into the gap below the gap opener.

2. Press Part 1 forward and leftward so the angled edge hooks beind the control panel and the adhesive tape attaches. Pull out the gap opener.

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the adhesive tape is placed on the right side and the holes match. Screw part 2 onto part 1 by using the enclosed screws.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:
Part 1: Attaching part (the smallest part)
Part 2: ClicOn face plate.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Peel off the adhesive tape cover on Part 1. Press Part 1 into the gap below the gap opener.

2. Press Part 1 forward and leftward so the angled edge hooks beind the control panel and the adhesive tape attaches. Pull out the gap opener.

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the adhesive tape is placed on the right side and the holes match. Screw part 2 onto part 1 by using the enclosed screws.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount