ClicOn No Holes Dash Mount for Dodge Journey 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654652
 

ClicOn Angled Mount for Dodge Journey 11-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn. This ClicOn fits models with or without facroty navigation/information screen. This ClicOn is divided into two parts: Part 1: The attaching part (the smallest part) Part 2: The ClicOn faceplate

1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen the gap.

2. Peel off the cover of the adhesive tape on Part 1. Place the thin edge of Part 1 against the gap between the two gap openers. The tape on the thick part of Part 1 should be facing the passenger side. Press the thin edge firmly into the gap and at the same time: bend Part 1 to the left until you see or hear/feel it click into place. The adhesive tape will attach to the console edge. Pull out the gap openers.

3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to
open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Do not press the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the
ClicOn to the left with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the right side of Part 2 to the center panel. Hold the ClicOn in that position and tighten the screws.

4. The
ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn. This ClicOn fits models with or without facroty navigation/information screen. This ClicOn is divided into two parts: Part 1: The attaching part (the smallest part) Part 2: The ClicOn faceplate

1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen the gap.

2. Peel off the cover of the adhesive tape on Part 1. Place the thin edge of Part 1 against the gap between the two gap openers. The tape on the thick part of Part 1 should be facing the passenger side. Press the thin edge firmly into the gap and at the same time: bend Part 1 to the left until you see or hear/feel it click into place. The adhesive tape will attach to the console edge. Pull out the gap openers.

3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to
open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Do not press the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the
ClicOn to the left with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the right side of Part 2 to the center panel. Hold the ClicOn in that position and tighten the screws.

4. The
ClicOn is in place.
Contains 1 x vehicle specific dash mount