ClicOn No Holes Dash Mount for Chrysler 300c 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654647
 

ClicOn Centre Mount for Chrysler 300c 11-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap opener into the seam/gap between the climate control panel and the center console panel, to widen the gap. Use the enclosed alcohol pad to clean the area where the
ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the curved edge on the lower part of the ClicOn into the seam/gap next to the gap opener.

2. Flip the
ClicOn upward, towards the air vent, and at the same time press forward on the lower part of the ClicOn so the lower curved edge goes all the way into the gap and hooks behind the climate control panel. Pull out the gap opener.

3. Place your fingers underneath the
ClicOn. Push so the ClicOn flexes upward and then hook the angled edge around the lower air vent edge. Press down on top of the ClicOn to make sure the ClicOn is properly attached to the lower air vent edge.

4. The
ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap opener into the seam/gap between the climate control panel and the center console panel, to widen the gap. Use the enclosed alcohol pad to clean the area where the
ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the curved edge on the lower part of the ClicOn into the seam/gap next to the gap opener.

2. Flip the
ClicOn upward, towards the air vent, and at the same time press forward on the lower part of the ClicOn so the lower curved edge goes all the way into the gap and hooks behind the climate control panel. Pull out the gap opener.

3. Place your fingers underneath the
ClicOn. Push so the ClicOn flexes upward and then hook the angled edge around the lower air vent edge. Press down on top of the ClicOn to make sure the ClicOn is properly attached to the lower air vent edge.

4. The
ClicOn is in place.
Contains 1 x vehicle specific dash mount