ClicOn No Holes Dash Mount for Lexus CT Series 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654626
 

ClicOn Centre Mount for Lexus CT Series 11-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard ledge, to widen the gap. Peel off the adhesive tape covers on the ClicOn. Place the lower part of the ClicOn into the gap next to the gap opener.

2. Press the upper part of the ClicOn downward so the ClicOn flexes a bit. In the same time: press the ClicOn forward so the lower edge goes into the gap next to the gap opener and the upper edge goes into the upper part of the air vent. Release the pressure when you see that the lower edge is all the way into the gap and the upper edge rests on the frame surrounding the air vent. Pull out the gap opener.

3. You can choose to place this ClicOn onto the left air vent, or to have two ClicOn installed at the same time.

4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard ledge, to widen the gap. Peel off the adhesive tape covers on the ClicOn. Place the lower part of the ClicOn into the gap next to the gap opener.

2. Press the upper part of the ClicOn downward so the ClicOn flexes a bit. In the same time: press the ClicOn forward so the lower edge goes into the gap next to the gap opener and the upper edge goes into the upper part of the air vent. Release the pressure when you see that the lower edge is all the way into the gap and the upper edge rests on the frame surrounding the air vent. Pull out the gap opener.

3. You can choose to place this ClicOn onto the left air vent, or to have two ClicOn installed at the same time.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount