ClicOn No Holes Dash Mount for Volvo XC60 09-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654625
 

ClicOn Centre Mount - High Left for Volvo XC60 09-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Volvo XC60 09-17




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the display and the frame surrounding the center console, to widen the gap. Peel off the adhesive tape cover on the ClicOn.

 

2. Hook the grooved edge on the lower part of the ClicOn under the upper edge of the air vent. Adjust the ClicOn position until you hear/feel that the grooved edge hooks into place properly.

 

3. Pull the upper part of the ClicOn upward and hook the angled upper edge into the gap next to gap opener. Pull out the gap opener.

 

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the display and the frame surrounding the center console, to widen the gap. Peel off the adhesive tape cover on the ClicOn.

 

2. Hook the grooved edge on the lower part of the ClicOn under the upper edge of the air vent. Adjust the ClicOn position until you hear/feel that the grooved edge hooks into place properly.

 

3. Pull the upper part of the ClicOn upward and hook the angled upper edge into the gap next to gap opener. Pull out the gap opener.

 

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount