ClicOn No Holes Dash Mount for Volkswagen Amarok 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654602
 

ClicOn Angled Mount for Volkswagen Amarok 11-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Volkswagen Amarok 11-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please Note NOT for entry level 2WD

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:


Part 1: Attaching piece (the round part)
Part 2: Mounting plate

1. Remove the round cover below the air vent. Place Part 1 in the hole (Part 1 only fits one way into the hole, if it does not fit turn Part 1 sligthly to get it into the correct position in order to fit)

2. Turn Part 1 clockwise so you feel it is firmly in place. Tighten the screw in Part 1 slightly (not too hard) with the enclosed tool.

3. Place Part 2 onto Part 1 so the holes match. Screw part 2 onto Part 1 using the enclosed screws.

4. The ClicOn is in place.

Please Note NOT for entry level 2WD

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:


Part 1: Attaching piece (the round part)
Part 2: Mounting plate

1. Remove the round cover below the air vent. Place Part 1 in the hole (Part 1 only fits one way into the hole, if it does not fit turn Part 1 sligthly to get it into the correct position in order to fit)

2. Turn Part 1 clockwise so you feel it is firmly in place. Tighten the screw in Part 1 slightly (not too hard) with the enclosed tool.

3. Place Part 2 onto Part 1 so the holes match. Screw part 2 onto Part 1 using the enclosed screws.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount