ClicOn No Holes Dash Mount for Volkswagen Amarok 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654601
 

ClicOn Centre Mount NOT for GPS Devices for Volkswagen Amarok 11-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please Note NOT for entry level 2WD

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:

Part 1: Attaching piece (the round part)
Part 2: Mounting plate

1. Remove the round cover below the air vent. Place Part 1 in the hole (Part 1 only fits one way into the hole, if it does not fit turn Part 1 sligthly to get it into the correct position in order to fit)

2. Turn Part 1 clockwise so you feel it is firmly in place. Tighten the screw in Part 1 slightly (not too hard) with the enclosed tool.

3. Place Part 2 onto Part 1 so the holes match. Screw part 2 onto Part 1 using the enclosed screws.

4. The ClicOn is in place.

Please Note NOT for entry level 2WD

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts:

Part 1: Attaching piece (the round part)
Part 2: Mounting plate

1. Remove the round cover below the air vent. Place Part 1 in the hole (Part 1 only fits one way into the hole, if it does not fit turn Part 1 sligthly to get it into the correct position in order to fit)

2. Turn Part 1 clockwise so you feel it is firmly in place. Tighten the screw in Part 1 slightly (not too hard) with the enclosed tool.

3. Place Part 2 onto Part 1 so the holes match. Screw part 2 onto Part 1 using the enclosed screws.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount