ClicOn No Holes Dash Mount for Mitsubishi Triton 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654575
 

ClicOn Angled Mount for Mitsubishi Triton 10-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Mitsubishi Triton 10-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of one of the enclosed gap openers into the gap between the lower dashboard section and the floor console, to widen the gap. Peel off the adhesive tape cover on the ClicOn. Hook the angled edge on the lower part of the ClicOn under the edge of the lower dashboard section. Slide the ClicOn rightward until is is placed next to the gap opener. Pull out the gap opener.

2. Press both gap openers into the gap between the upper and lower dashboard sections. Press the lower part of the ClicOn upward so the angled edge is all the way into the gap.

3. Pull the upper part of the ClicOn upward, then press it forward so the angled edge goes into the gap between the gap openers. Press forward on the upper part of the ClicOn so the angled edge goes all the way into the gap. Pull out the gap openers.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of one of the enclosed gap openers into the gap between the lower dashboard section and the floor console, to widen the gap. Peel off the adhesive tape cover on the ClicOn. Hook the angled edge on the lower part of the ClicOn under the edge of the lower dashboard section. Slide the ClicOn rightward until is is placed next to the gap opener. Pull out the gap opener.

2. Press both gap openers into the gap between the upper and lower dashboard sections. Press the lower part of the ClicOn upward so the angled edge is all the way into the gap.

3. Pull the upper part of the ClicOn upward, then press it forward so the angled edge goes into the gap between the gap openers. Press forward on the upper part of the ClicOn so the angled edge goes all the way into the gap. Pull out the gap openers.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount