ClicOn No Holes Dash Mount for Renault Traffic 11-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654517
 

ClicOn Centre Mount for Renault Traffic 11-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Nissan Primastar 11-14
Opel Vivaro 11-14
Renault Trafic 11-14
Vauxhall Vivaro 11-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn. This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Place Part 1 straight over the air vent. Press the curved edge on part 1 into the gap under the dashboard overhang. Slide Part 1 rightward in the gap, until it stops. Flip Part 1 upward so the curved edge hooks into the gap and the adhesive tape attaches.

 

2. Peel off the adhesive tape cover on Part 2. Press the angled edge on the lower part into the gap between the air vent frame and the dashboard. Press Part 2 forward and then firmly downward, so the angled edge hooks behind the air vent frame.

 

3. Place Part 2 onto Part 1 so the holes match. Attach Part 2 onto Part 1 by using the enclosed screws.

 

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn. This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

 

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Place Part 1 straight over the air vent. Press the curved edge on part 1 into the gap under the dashboard overhang. Slide Part 1 rightward in the gap, until it stops. Flip Part 1 upward so the curved edge hooks into the gap and the adhesive tape attaches.

 

2. Peel off the adhesive tape cover on Part 2. Press the angled edge on the lower part into the gap between the air vent frame and the dashboard. Press Part 2 forward and then firmly downward, so the angled edge hooks behind the air vent frame.

 

3. Place Part 2 onto Part 1 so the holes match. Attach Part 2 onto Part 1 by using the enclosed screws.

 

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount