ClicOn No Holes Dash Mount for Hyundai i45 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654503
 

ClicOn Angled Mount for Hyundai i45 10-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Hyundai Sonata 11-14
Hyundai i45 10-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be
installed. Press the thin end of the enclosed gap opener into the seam between the rubber sealant and the A-post panel to open the gap. Peel off the cover of adhesive tape on the ClicOn.

2. Insert the angled edge on the lower part of the Clicon into the gap and hook it behind the A-post panel edge.

3. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn snap around the A-post panel edge. Pull out the gap opener.

4. The ClicOn is in place.

Attention! Read all instructions before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be
installed. Press the thin end of the enclosed gap opener into the seam between the rubber sealant and the A-post panel to open the gap. Peel off the cover of adhesive tape on the ClicOn.

2. Insert the angled edge on the lower part of the Clicon into the gap and hook it behind the A-post panel edge.

3. Press firmly upwards with your right hand on the bottom part of the ClicOn and rightward on the left side of the ClicOn with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ClicOn snap around the A-post panel edge. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount