ClicOn No Holes Dash Mount for Mercedes Benz E-Class Convertible 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654459
 

ClicOn Centre Mount for Mercedes Benz E-Class Convertible 10-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part
Part 2. Mounting plate

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Place Part 1 so the adesive tape is pointing downward, and press the grooved edge into the gap between the frame surrounding the display and the panel in front of the display. Press until you hear/feel it snaps into place.

2. Open the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 so the notch hooks into the upper part of the air vent and the holes match the holes in Part 1.

3. Attach Part 2 onto Part 1 by using the enclosed screws.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part
Part 2. Mounting plate

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Place Part 1 so the adesive tape is pointing downward, and press the grooved edge into the gap between the frame surrounding the display and the panel in front of the display. Press until you hear/feel it snaps into place.

2. Open the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 so the notch hooks into the upper part of the air vent and the holes match the holes in Part 1.

3. Attach Part 2 onto Part 1 by using the enclosed screws.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount