ClicOn No Holes Dash Mount for Alfa Romeo MiTo 09-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654385
 

ClicOn Angled Mount for Alfa Romeo MiTo 09-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided. Please Note: Only with storage below air

Fits:

Alfa Romeo MiTo 09-18




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before installing the ClicOn.

1. Use the enclosed alochol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the climate control panel and the center console frame, to widen the gap. Peel off the adhesive tape covers on the ClicOn . Press the curved edge on the upper part of the ClicOn into the gap between the control panel and the center console frame.

2. Flip the ClicOn downward/forward so the curved upper edge hooks behind the control panel.

3. Press the lower part of the ClicOn upward so the lower edge goes into the gap next to the gap opener. Pull out the gap opener.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before installing the ClicOn.

1. Use the enclosed alochol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the climate control panel and the center console frame, to widen the gap. Peel off the adhesive tape covers on the ClicOn . Press the curved edge on the upper part of the ClicOn into the gap between the control panel and the center console frame.

2. Flip the ClicOn downward/forward so the curved upper edge hooks behind the control panel.

3. Press the lower part of the ClicOn upward so the lower edge goes into the gap next to the gap opener. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount