ClicOn No Holes Dash Mount for Lexus LX Series 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654324
 

ClicOn Center Mount for Lexus LX Series 10-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn. Place the thin edge with adhesive tape onto the upper inner part of the air vent.

2. Press firmly upwards on the lower part of the ClicOn. It will now flex upwards. Then insert the thin edge with adhesive tape onto the lower inner part of the air vent.

3. Place your finger on the upper inside of the ClicOn and press firmly upwards for best possible attachment of the adhesive tape.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn. Place the thin edge with adhesive tape onto the upper inner part of the air vent.

2. Press firmly upwards on the lower part of the ClicOn. It will now flex upwards. Then insert the thin edge with adhesive tape onto the lower inner part of the air vent.

3. Place your finger on the upper inside of the ClicOn and press firmly upwards for best possible attachment of the adhesive tape.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount