ClicOn No Holes Dash Mount for Lexus RX Series 10-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654322
 

ClicOn Centre Mount for Lexus RX Series 10-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Lexus RX Series 10-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn. The ClicOn fits models with and without factory navigation screen.

1. Use the enclsoed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the dashboard ledge and the center console top, to widen the gap. Peel off the cover of adhesive tape on the ClicOn. Hook the curved edge on the upper part of the ClicOn into the gap next to the gap opener. Press until you see or hear/feel it click into place. Pull out the gap opener.

2. Place your fingers behind the ClicOn face plate and pull towards you. The ClicOn will now flex forward. Then hook the angled edge around the upper air vent edge.

3. The ClicOn can be attached anywhere within the width of the air vent and you can have two ClicOn attached next to each other. This instruction applies for either position.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn. The ClicOn fits models with and without factory navigation screen.

1. Use the enclsoed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the dashboard ledge and the center console top, to widen the gap. Peel off the cover of adhesive tape on the ClicOn. Hook the curved edge on the upper part of the ClicOn into the gap next to the gap opener. Press until you see or hear/feel it click into place. Pull out the gap opener.

2. Place your fingers behind the ClicOn face plate and pull towards you. The ClicOn will now flex forward. Then hook the angled edge around the upper air vent edge.

3. The ClicOn can be attached anywhere within the width of the air vent and you can have two ClicOn attached next to each other. This instruction applies for either position.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount