ClicOn No Holes Dash Mount for Audi A5 07-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654263
 

ClicOn Centre Mount for Audi A5 07-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Audi A4 Allroad 08-16 
Audi A4 Avant 08-15 
Audi A4 Sedan 08-15 
Audi A5 07-16 
Audi S4 Avant 08-15 
Audi S4 Sedan 08-15 
Audi S5 07-16 




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Clean the area where the ClicOn is to be installed with the enclsoed alcohol pad. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap between the frame surrounding the air vent and the panel surrounding the display, press it upward under the panel surrounding the display.

3. Squeeze the ClicOn together and press the lower edge into the gap between the gap openers. Press forward on the lower part of the ClicOn so the thin edge goes all the way into the gap. Pull out the gap openers.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Clean the area where the ClicOn is to be installed with the enclsoed alcohol pad. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap between the frame surrounding the air vent and the panel surrounding the display, press it upward under the panel surrounding the display.

3. Squeeze the ClicOn together and press the lower edge into the gap between the gap openers. Press forward on the lower part of the ClicOn so the thin edge goes all the way into the gap. Pull out the gap openers.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount