ClicOn No Holes Dash Mount for Toyota Rukus 08-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654110
 

ClicOn Centre Mount - Low for Toyota Rukus 08-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Toyota Rukus 08-16
Toyota xB 08-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

Installation for models with Automatic gear shift: 1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the panel frame surrounding the gear shift, to widen the gap. Press the upper left corner of the ClicOn into the gap next to the gap opener. Keep the ClicOn in an angled position so the adhesive tape does not attach. Pull out the gap opener. Slide the ClicOn 17 mm (¾ inch) forward. Press down on the left side of the ClicOn so the rest of the angled edge goes into the gap. 2. Press the gap opener into the gap between the center console panel frame and the console sidewall. Slide the gap opener towards the ClicOn. Press down on the top right side of the ClicOn so the angled right edge goes into the gap next to the gap opener. Press until you see/hear/feel it click into place. Pull out the gap opener.
Installation for models with Manual gear shift 3. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the console trim, to widen the gap. Push down on the gap opener to widen the gap even more. Press the angled edge on the right side of the ClicOn into the gap next to the gap opener. Press the ClicOn leftward so the angled left edge hooks over the console edge by the rubber boot. Press until you see/hear/feel it click into place. Press down on the left side of the ClicOn to make sure the angled edge is properly hooked over the edge.
4. The ClicOn is in place, fits models with manual and automatic gear shift.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

Installation for models with Automatic gear shift: 1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the panel frame surrounding the gear shift, to widen the gap. Press the upper left corner of the ClicOn into the gap next to the gap opener. Keep the ClicOn in an angled position so the adhesive tape does not attach. Pull out the gap opener. Slide the ClicOn 17 mm (¾ inch) forward. Press down on the left side of the ClicOn so the rest of the angled edge goes into the gap. 2. Press the gap opener into the gap between the center console panel frame and the console sidewall. Slide the gap opener towards the ClicOn. Press down on the top right side of the ClicOn so the angled right edge goes into the gap next to the gap opener. Press until you see/hear/feel it click into place. Pull out the gap opener.
Installation for models with Manual gear shift 3. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the console trim, to widen the gap. Push down on the gap opener to widen the gap even more. Press the angled edge on the right side of the ClicOn into the gap next to the gap opener. Press the ClicOn leftward so the angled left edge hooks over the console edge by the rubber boot. Press until you see/hear/feel it click into place. Press down on the left side of the ClicOn to make sure the angled edge is properly hooked over the edge.
4. The ClicOn is in place, fits models with manual and automatic gear shift.
Contains 1 x vehicle specific dash mount