ClicOn No Holes Dash Mount for BMW X6 09-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654007
 

ClicOn Centre Mount for BMW X6 09-14 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the air vent panel frame and the dashboard ledge, to widen it. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Hold the ClicOn in an almost horizontal position. Press the curved edge on the lower part of the ClicOn into the gap between the air vent panel overhang and the stereo. Press until you see or hear/feel it snaps into place. Then flip the ClicOn upwards, towards the air vent.

  • 3. Press firmly forward on the upper part of the ClicOn so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.

  • 4. The ClicOn is in place.

Item Number 654007 Fits Both BMW X5 and X6

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the air vent panel frame and the dashboard ledge, to widen it. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Hold the ClicOn in an almost horizontal position. Press the curved edge on the lower part of the ClicOn into the gap between the air vent panel overhang and the stereo. Press until you see or hear/feel it snaps into place. Then flip the ClicOn upwards, towards the air vent.

  • 3. Press firmly forward on the upper part of the ClicOn so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.

  • 4. The ClicOn is in place.

Item Number 654007 Fits Both BMW X5 and X6

Contains 1 x vehicle specific dash mount