ClicOn No Holes Dash Mount for Peugeot 4007 08-13

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 654001
 

ClicOn Angled Mount for Peugeot 4007 08-13

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Citroen C-Crosser 07-13
Mitsubishi Outlander 07-12
Peugeot 4007 08-13




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

 

  • 2. Hook the upper part of the ClicOn over the lower edge of the air vent.

 

  • 3. Prize the gap slightly wider using the gap opener, in the same time press the right side of the angled edge on the lower part of the ClicOn into the gap next to the gap opener. Pull out the gap opener and press it into the gap by the console corner, in the same time press forward on the left side of the lower part of the ClicOn so the angled edge goes all the way into the gap. Pull out the gap opener. Press upward on the lower edge of the ClicOn so it is properly in place.

 

  • 4. The ClicOn is in place.

 

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

 

  • 2. Hook the upper part of the ClicOn over the lower edge of the air vent.

 

  • 3. Prize the gap slightly wider using the gap opener, in the same time press the right side of the angled edge on the lower part of the ClicOn into the gap next to the gap opener. Pull out the gap opener and press it into the gap by the console corner, in the same time press forward on the left side of the lower part of the ClicOn so the angled edge goes all the way into the gap. Pull out the gap opener. Press upward on the lower edge of the ClicOn so it is properly in place.

 

  • 4. The ClicOn is in place.

 

Contains 1 x vehicle specific dash mount