ClicOn No Holes Dash Mount for Audi A3 S3 07-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653991
 

ClicOn Angled Mount for Audi A3 S3 07-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Audi A3 07-12
Audi S3 07-13




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

Not for use with Factory Navigation

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.

  • 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the stereo and the dashboard, to widen the gap.

  • 2. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 forward/leftward so the angled edge goes all the way into the gap and the adhesive tape attaches to the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the adhesive tape is to the right and the holes match. Attach Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

Not for use with Factory Navigation

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.

  • 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the stereo and the dashboard, to widen the gap.

  • 2. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 forward/leftward so the angled edge goes all the way into the gap and the adhesive tape attaches to the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the adhesive tape is to the right and the holes match. Attach Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount