ClicOn No Holes Dash Mount for Fiat Scudo 07-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653972
 

ClicOn Centre Mount for Fiat Scudo 07-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Citroen Dispatch 08-16
Citroen Jumpy 2nd Gen 07-16
Fiat Scudo 07-16
Peugeot Expert 07-16
Toyota ProAce 13-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.


It is very important to place the ClicOn in the exact same position as shown in the pictures.

1. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the coin compartment, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap between the gap openers.

3. Pull the ClicOn downward and press the lower part foward so the angled edge hooks into the gap between the frame surrounding the stereo and the frame surrounding the air vent. Pull out the gap openers.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.


It is very important to place the ClicOn in the exact same position as shown in the pictures.

1. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the coin compartment, to widen the gap. Peel off the adhesive tape covers on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap between the gap openers.

3. Pull the ClicOn downward and press the lower part foward so the angled edge hooks into the gap between the frame surrounding the stereo and the frame surrounding the air vent. Pull out the gap openers.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount