ClicOn No Holes Dash Mount for Nissan Dualis 07-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653966
 

ClicOn Angled Mount for Nissan Dualis 07-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Nissan Dualis 07-15
Nissan Qashqai 07-13
Nissan Qashqai +2 09-13




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.
This ClicOn consists of two parts.

Part 1. Attaching part

Part 2. ProClip face plate

  • 1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape covers on Part 1. Press the angled edge on Part 1 into the gap between the control panel and the surrounding frame.
  • 2. Press Part 1 leftward so the angled edge hooks behind the control panel and the adhesive tape on the right end attaches to the control panel frame.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes fit and the adhesive tape is to the right. Screw part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.
This ClicOn consists of two parts.

Part 1. Attaching part

Part 2. ProClip face plate

  • 1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape covers on Part 1. Press the angled edge on Part 1 into the gap between the control panel and the surrounding frame.
  • 2. Press Part 1 leftward so the angled edge hooks behind the control panel and the adhesive tape on the right end attaches to the control panel frame.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes fit and the adhesive tape is to the right. Screw part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount