ClicOn No Holes Dash Mount for Holden Barina 07-09

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653956
 

ClicOn Angled Mount for Holden Barina 07-09

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Holden Corsa 07-08
Opel Corsa 07-14
Vauxhall Corsa 07-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific.
'

Please read all instructions and look at the pictures before attaching the ClicOn mount.

 

This ClicOn consists of two parts.

Part 1: Attaching part (the smallest part)

Part 2: ClicOn face plate.

 

  • 1. Press the thin ends of the enclosed gap openers into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. 

 

  • 2. Press Part 1 into the gap between the gap openers. 

 

  • 3. Press leftwards on Part 1| away from the steering wheel| so the angled edge hooks behind the control panel and the adhesive attaches on the dashboard. Pull out the gap openers. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1| in the same angle as Part 1. 

 

  • 4.The ClicOn is in place.
'
'

Please read all instructions and look at the pictures before attaching the ClicOn mount.

 

This ClicOn consists of two parts.

Part 1: Attaching part (the smallest part)

Part 2: ClicOn face plate.

 

  • 1. Press the thin ends of the enclosed gap openers into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. 

 

  • 2. Press Part 1 into the gap between the gap openers. 

 

  • 3. Press leftwards on Part 1| away from the steering wheel| so the angled edge hooks behind the control panel and the adhesive attaches on the dashboard. Pull out the gap openers. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1| in the same angle as Part 1. 

 

  • 4.The ClicOn is in place.
'
Contains 1 x vehicle specific dash mount