ClicOn No Holes Dash Mount for SsangYong RX270 05-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653952
 

ClicOn Angled Mount for SsangYong RX270 05-07

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

SsangYong RX270 Year(s):05-07




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap in the dashboard, to widen the gap. Peel off the cover of the adhesive tape on Part 1.

  • 2. Press the angled edge on part 1 into the gap next to the gap opener. Press Part 1 forward/upward so the angled edge goes all the way into the gap and hooks behind the lower part of the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in part 2 with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Attach Part 2 onto part 1 with the enclosed screws.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap in the dashboard, to widen the gap. Peel off the cover of the adhesive tape on Part 1.

  • 2. Press the angled edge on part 1 into the gap next to the gap opener. Press Part 1 forward/upward so the angled edge goes all the way into the gap and hooks behind the lower part of the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in part 2 with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Attach Part 2 onto part 1 with the enclosed screws.

  • 4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount