ClicOn No Holes Dash Mount for Dodge Nitro 07-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653930
 

ClicOn Angled Mount for Dodge Nitro 07-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Dodge Nitro 07-12




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn is divided into two parts:

Part 1: The attaching part (the smallest part)

Part 2: The ClicOn faceplate

  • 1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen the gap. Place it in the same position as in the picture, in the same height.

  • 2. Peel off the cover of the adhesive tape on Part 1. Place the angled edge of Part 1 against the gap above the lower gap opener. Press the angled edge firmly into the gap and at the same time bend to the left until you hear/feel it snap into place. Pull out the gap openers.

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the right side. Do not attach the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the ClicOn to the left optimal adjustment of the mount. Hold it in that position and tighten the screws.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn is divided into two parts:

Part 1: The attaching part (the smallest part)

Part 2: The ClicOn faceplate

  • 1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen the gap. Place it in the same position as in the picture, in the same height.

  • 2. Peel off the cover of the adhesive tape on Part 1. Place the angled edge of Part 1 against the gap above the lower gap opener. Press the angled edge firmly into the gap and at the same time bend to the left until you hear/feel it snap into place. Pull out the gap openers.

  • 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the right side. Do not attach the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the ClicOn to the left optimal adjustment of the mount. Hold it in that position and tighten the screws.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount