ClicOn No Holes Dash Mount for Holden Barina 07-11

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653924
 

ClicOn Angled Mount for Holden Barina 07-11

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided. Please Note: Only with storage below air

Fits:

Chevrolet Aveo 07-11
Holden Barina 08-11




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap opener into the gap between the climate console panel frame and the dashboard overhang, to widen the gap.
Peel off the cover of adhesive tape on the ClicOn. Press the curved edge on the lower part of the ClicOn into the gap next to the gap opener.

2. Flip the ClicOn upwards, towards the air vent, so the curved edge on the lower part of the ClicOn hooks behind the climate control panel. Pull out the gap opener.

3. Press the gap opener into the gap in the dashboard. Press firmly forward on the right side of the ClicOn so the grooved edge goes into the gap below the gap opener. Press until you see the thin grooved edge is all the way into the gap. Pull out the gap opener.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap opener into the gap between the climate console panel frame and the dashboard overhang, to widen the gap.
Peel off the cover of adhesive tape on the ClicOn. Press the curved edge on the lower part of the ClicOn into the gap next to the gap opener.

2. Flip the ClicOn upwards, towards the air vent, so the curved edge on the lower part of the ClicOn hooks behind the climate control panel. Pull out the gap opener.

3. Press the gap opener into the gap in the dashboard. Press firmly forward on the right side of the ClicOn so the grooved edge goes into the gap below the gap opener. Press until you see the thin grooved edge is all the way into the gap. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount