ClicOn No Holes Dash Mount for Nissan Tiida 05-11

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653920
 

ClicOn Angled Mount for Nissan Tiida 05-11

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Nissan Tiida 05-11
Nissan Tiida Latio 05-11




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the two panel sections, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Hold the ClicOn in an almost horizontal position and press the curved edge on the upper part of theClicOn into the gap next to the gap opener. Flip the ClicOn down, towards the floor. The curved edge will then hook behind the stereo panel frame. Pull out the gap opener.

  • 3. Press the gap opener into the gap in the panel section underneath the dashboard. Hold it in that position, then press firmly forward on the lower part of the ClicOn so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it snaps into place. Press upwards underneath the ClicOn to make sure the angled edge is all the way into the gap. Pull out the gap opener.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the two panel sections, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Hold the ClicOn in an almost horizontal position and press the curved edge on the upper part of theClicOn into the gap next to the gap opener. Flip the ClicOn down, towards the floor. The curved edge will then hook behind the stereo panel frame. Pull out the gap opener.

  • 3. Press the gap opener into the gap in the panel section underneath the dashboard. Hold it in that position, then press firmly forward on the lower part of the ClicOn so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it snaps into place. Press upwards underneath the ClicOn to make sure the angled edge is all the way into the gap. Pull out the gap opener.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount