ClicOn No Holes Dash Mount for Holden Epica 07-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653900
 

ClicOn Angled Mount for Holden Epica 07-12 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

ThisClicOn consists of two parts:

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate


  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap above the gap opener.

  • 2. Press Part 1 leftward so the angled edge hooks behind the control panel and the adhesive tape attaches to the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

ThisClicOn consists of two parts:

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate


  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap above the gap opener.

  • 2. Press Part 1 leftward so the angled edge hooks behind the control panel and the adhesive tape attaches to the dashboard. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount