ClicOn No Holes Dash Mount for Ford Escape 07-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653898
 

ClicOn Angled Mount for Ford Escape 07-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Ford Escape 07-12
Mazda Tribute 07-09




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the center panel, to widen the gap. Peel off the adhesive tape cover on Part 1. Place the angled edge of Part 1 in the gap above the gap opener.

  • Prize the gap wider with the gap opener, in the same time press the angled edge into the gap and flip Part 1 leftwards so the angled edge hooks behind the frame surrounding the air vent. Pull out the gap opener.

  • Open up the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws.

  • TheClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the center panel, to widen the gap. Peel off the adhesive tape cover on Part 1. Place the angled edge of Part 1 in the gap above the gap opener.

  • Prize the gap wider with the gap opener, in the same time press the angled edge into the gap and flip Part 1 leftwards so the angled edge hooks behind the frame surrounding the air vent. Pull out the gap opener.

  • Open up the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws.

  • TheClicOn is in place.

Contains 1 x vehicle specific dash mount