ClicOn No Holes Dash Mount for Ford Escape 07-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653897
 

ClicOn Centre Mount for Ford Escape 07-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Ford Escape 07-12
Mazda Tribute 07-09




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener.

  • Open up the predrilled holes in Part 2 with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on Part 2 into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide Part 2 sideway so the holes match with the holes in Part 1.

  • Screw Part 2 onto Part 1 with the enclosed screws.

  • The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener.

  • Open up the predrilled holes in Part 2 with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on Part 2 into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide Part 2 sideway so the holes match with the holes in Part 1.

  • Screw Part 2 onto Part 1 with the enclosed screws.

  • The ClicOn is in place.

Contains 1 x vehicle specific dash mount