ClicOn No Holes Dash Mount for Holden Commodore VE Berlina V6 (Ser 1) 06-10

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653891
 

ClicOn Centre Mount for Holden Commodore VE Berlina V6 (Ser 1) 06-10

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Holden Calais 07-10




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Peel off the cover of the adhesive tape on the ClicOn. Press the thin end of the enclosed gap opener into the gap between the dashboard and the trim and prize the trim loose just a little bit. Hook/Press the angled edge in the upper part of the ClicOn into the gap between the trim and the frame surrounding the air vent. Pull out the gap opener.

  • 2. Slide the ClicOn sideways so the vertical part is aligned with the gap between the stereo frame and the center console frame. Press the gap opener into the gap below the ClicOn, between the stereo frame and the center console frame, to widen the gap. Press forward on the lower part of the ClicOn so the grooved edge on the vertical part goes into the gap above the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.

  • 3. Press the trim forward, back into place.

  • 4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Peel off the cover of the adhesive tape on the ClicOn. Press the thin end of the enclosed gap opener into the gap between the dashboard and the trim and prize the trim loose just a little bit. Hook/Press the angled edge in the upper part of the ClicOn into the gap between the trim and the frame surrounding the air vent. Pull out the gap opener.

  • 2. Slide the ClicOn sideways so the vertical part is aligned with the gap between the stereo frame and the center console frame. Press the gap opener into the gap below the ClicOn, between the stereo frame and the center console frame, to widen the gap. Press forward on the lower part of the ClicOn so the grooved edge on the vertical part goes into the gap above the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.

  • 3. Press the trim forward, back into place.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount