ClicOn No Holes Dash Mount for Holden Commodore VE Omega (Ser 1) 06-10

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653888
 

ClicOn Centre Mount for Holden Commodore VE Omega (Ser 1) 06-10

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Holden Commodore Omega 07-10




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the air vent and the trim and prize the trim loose just a little bit. Press the angled edges on the upper part of the ClicOn into the gap between the trim and the control panel. Press the ClicOn upward/forward so the upper edge hooks over the edge behind the trim. Pull out the gap opener.

  • 2. Press the gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Align the vertical part of the ClicOn over the gap between the control panel and the surrounding frame. Press forward on the lower part of the ClicOn so the grooved edge on the vertical part goes into the gap above the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.

  • 3. Press the ClicOn forward so the adhesive tape attaches. Press the trim forward back into place.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the air vent and the trim and prize the trim loose just a little bit. Press the angled edges on the upper part of the ClicOn into the gap between the trim and the control panel. Press the ClicOn upward/forward so the upper edge hooks over the edge behind the trim. Pull out the gap opener.

  • 2. Press the gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Align the vertical part of the ClicOn over the gap between the control panel and the surrounding frame. Press forward on the lower part of the ClicOn so the grooved edge on the vertical part goes into the gap above the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.

  • 3. Press the ClicOn forward so the adhesive tape attaches. Press the trim forward back into place.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount