ClicOn No Holes Dash Mount for Volkswagen Crafter 07-14 and Mercedes Benz Sprinter 07-18

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653873
 

ClicOn Centre Mount for Volkswagen Crafter 07-14 and Mercedes Benz Sprinter 07-18

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Mercedes Benz Sprinter 07-18
Volkswagen Crafter 07-16




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard and prize the frame surrounding the control panel loose slightly. Peel off the adhesive tape covers on the ClicOn. Place the curved edge on the left part of the ClicOn into the gap between the frame surrounding the control panel and the frame surrounding the air vent.

  • 2. Pull out the gap opener. Press forward on the frame surrounding the control panel so it snaps back into place and the curved left edge of the ClicOn is locked into place.

  • 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard and press forward on the gap opener so the gap is widened. In the same time press forward on the right side of the ClicOn so the angled edge hooks into the gap above the gap opener. Pull out the gap opener. Press the right part of the ClicOn toward the gap so the angled edge goes all the way into the gap.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard and prize the frame surrounding the control panel loose slightly. Peel off the adhesive tape covers on the ClicOn. Place the curved edge on the left part of the ClicOn into the gap between the frame surrounding the control panel and the frame surrounding the air vent.

  • 2. Pull out the gap opener. Press forward on the frame surrounding the control panel so it snaps back into place and the curved left edge of the ClicOn is locked into place.

  • 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard and press forward on the gap opener so the gap is widened. In the same time press forward on the right side of the ClicOn so the angled edge hooks into the gap above the gap opener. Pull out the gap opener. Press the right part of the ClicOn toward the gap so the angled edge goes all the way into the gap.

  • 4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount