ClicOn No Holes Dash Mount for Toyota FJ Cruiser 07-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653838
 

ClicOn Angled Mount for Toyota FJ Cruiser 07-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Toyota FJ Cruiser 07-15




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Peel off the cover of adhesive tape on the ClicOn. Open the glove compartment door. Press the angled edge on the upper part of the ClicOn into the gap in the dashboard ledge.

2. Press firmly forward on the lower part of the ClicOn so the angled edge hooks under the dashboard edge. Press until you see or hear/feel it snaps into place.

3. Press firmly upwards on the ClicOn to make sure it is properly attached. Close the glove compartment door.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Peel off the cover of adhesive tape on the ClicOn. Open the glove compartment door. Press the angled edge on the upper part of the ClicOn into the gap in the dashboard ledge.

2. Press firmly forward on the lower part of the ClicOn so the angled edge hooks under the dashboard edge. Press until you see or hear/feel it snaps into place.

3. Press firmly upwards on the ClicOn to make sure it is properly attached. Close the glove compartment door.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount