ClicOn No Holes Dash Mount for Ford Fiesta 06-08

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653731
 

ClicOn Centre Mount for Ford Fiesta 06-08

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Ford Fiesta 06-08




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.
This ProClip consists of two parts

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.


  • 1. Use the enclosed alcohol pad to clean the surface of the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap between the dashboard and the frame surrounding the control panel.

  • 2. Press Part 1 towards the steering wheel so the angled edge hooks behind the frame surrounding the control panel.

  • 3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. TheClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.
This ProClip consists of two parts

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.


  • 1. Use the enclosed alcohol pad to clean the surface of the area where the ClicOn is to be installed. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap between the dashboard and the frame surrounding the control panel.

  • 2. Press Part 1 towards the steering wheel so the angled edge hooks behind the frame surrounding the control panel.

  • 3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

  • 4. TheClicOn is in place.
Contains 1 x vehicle specific dash mount