ClicOn No Holes Dash Mount for Lexus GS Series 05-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653618
 

ClicOn Angled Mount for Lexus GS Series 05-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Lexus GS Series 05-12




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

It is important to position the ClicOn exactly as shown in the pictures.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap in the center console sidewall as shown in the picture, to widen the gap. Peel off the adhesive tape cover on part 1. Press the edge on Part 1 into the gap next to the gap opener.

  • 2. Press Part 1 upwards so the angled edge hooks behind the lower console sidewall and the adhesive tape attaches. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape covers on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. TheClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

It is important to position the ClicOn exactly as shown in the pictures.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap in the center console sidewall as shown in the picture, to widen the gap. Peel off the adhesive tape cover on part 1. Press the edge on Part 1 into the gap next to the gap opener.

  • 2. Press Part 1 upwards so the angled edge hooks behind the lower console sidewall and the adhesive tape attaches. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape covers on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 using the enclosed screws.

  • 4. TheClicOn is in place.
Contains 1 x vehicle specific dash mount