ClicOn No Holes Dash Mount for Subaru Impreza 05-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653616
 

ClicOn Angled Mount for Subaru Impreza 05-07

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Subaru Impreza 05-07




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Place them about 10 cm apart. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the gap openers.

  • 2. Press Part 1 leftwards, so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches to the dashboard. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the adhesive tape is on the right side and the holes fit. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Place them about 10 cm apart. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the gap openers.

  • 2. Press Part 1 leftwards, so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches to the dashboard. Pull out the gap openers.

  • 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the adhesive tape is on the right side and the holes fit. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount