ClicOn No Holes Dash Mount for BMW 3 Series E90 05-12

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653595
 

ClicOn Centre Mount with Nav & no wood grain for BMW 3 Series E90 05-12

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

BMW 316-330 E90/E91/E92/E93 Year(s):05-12




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention: For vehcle with navigation unit BUT not for wood grain dash

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap openers into the gap between the aluminum trim and the frame surrounding the climate control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. Press the grooved edge on the lower part of the ClicOn into the gap between the gap openers. Press until you see or hear/feel it click into place. Pull out the gap openers.

2. Press a gap opener firmly into the gap between the aluminum trim and the dashboard ledge, to widen the gap. Press forward on the ClicOn so the angled upper edge hooks into the gap. Press firmly down on the top right corner of the ClicOn to make sure the angled edge is all the way into the gap. Press until you see or hear/feel it click into place.

3. Press firmly down on the top left corner of the ClicOn to make sure the angled edge is all the way into the gap. Press until you see or hear/feel it click into place. Pull out the gap opener.

4. The ClicOn is in place.

Attention: For vehcle with navigation unit BUT not for wood grain dash

Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin end of the enclosed gap openers into the gap between the aluminum trim and the frame surrounding the climate control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. Press the grooved edge on the lower part of the ClicOn into the gap between the gap openers. Press until you see or hear/feel it click into place. Pull out the gap openers.

2. Press a gap opener firmly into the gap between the aluminum trim and the dashboard ledge, to widen the gap. Press forward on the ClicOn so the angled upper edge hooks into the gap. Press firmly down on the top right corner of the ClicOn to make sure the angled edge is all the way into the gap. Press until you see or hear/feel it click into place.

3. Press firmly down on the top left corner of the ClicOn to make sure the angled edge is all the way into the gap. Press until you see or hear/feel it click into place. Pull out the gap opener.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount