ClicOn No Holes Dash Mount for Kia Cerato 06-09

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653587
 

ClicOn Angled Mount for Kia Cerato 06-09 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions an look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap above the gap opener.
  • 2. Press Part 1 leftwards so the angled edge hooks behing the control panel and the adhesive tape attaches to the dashboard. Pull out the gap opener.
  • 3. Open upp the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.
  • 4. The ClicOn is in place.

Please read all of the instructions an look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap above the gap opener.
  • 2. Press Part 1 leftwards so the angled edge hooks behing the control panel and the adhesive tape attaches to the dashboard. Pull out the gap opener.
  • 3. Open upp the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.
  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount