ClicOn No Holes Dash Mount for Citroen C5 II 05-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653568
 

ClicOn Angled Mount for Citroen C5 II 05-07 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.


NOTE! It is important to place the ClicOn in the exactly same position as shown in the pictures.

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Align the gap opener with the gap in the control panel, as shown in the picture. Peel off the adhesive tape covers on the ClicOn.

2. Place the ClicOn above the gap opener. Press the lower corner of the grooved part of the ClicOn into the gap above the gap opener.

3. Press forwards on the lower part of the ClicOn, in the same time continue by pressing forwards on the upper part of the ClicOn so the grooved edge goes all the way into the gap. Press until you hear/feel it snaps into place. Pull out the gap opener.

4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.


NOTE! It is important to place the ClicOn in the exactly same position as shown in the pictures.

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Align the gap opener with the gap in the control panel, as shown in the picture. Peel off the adhesive tape covers on the ClicOn.

2. Place the ClicOn above the gap opener. Press the lower corner of the grooved part of the ClicOn into the gap above the gap opener.

3. Press forwards on the lower part of the ClicOn, in the same time continue by pressing forwards on the upper part of the ClicOn so the grooved edge goes all the way into the gap. Press until you hear/feel it snaps into place. Pull out the gap opener.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount