ClicOn No Holes Dash Mount for Hyundai Tucson 05-10

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653531
 

ClicOn Angled Mount for Hyundai Tucson 05-10 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. Press the lower part of the ClicOn into the gap next to the gap opener. Pull out the gap.

  • 2. Hook the angled edge on the upper part of the ClicOn into the gap above the frame surrounding the air vent.

  • 3. Press downwards on top of the ClicOn so the angled edge goes all the way into the gap.

  • 4. The ClicOn is in place.

Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. Press the lower part of the ClicOn into the gap next to the gap opener. Pull out the gap.

  • 2. Hook the angled edge on the upper part of the ClicOn into the gap above the frame surrounding the air vent.

  • 3. Press downwards on top of the ClicOn so the angled edge goes all the way into the gap.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount