ClicOn No Holes Dash Mount for Nissan Pulsar 03-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653520
 

ClicOn Angled Mount Series 2 for Nissan Pulsar 03-07 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the frame surrounding the stereo, to widen the gap. Place the gap openers about 10 cm apart. Peel off the adhesive tape covers on the ClicOn.

2. Hook the angled edge on the upper part of the ClicOn over the frame surrounding the air vent.

3. Press the lower part of the ClicOn into the gap between the gap openers. Pull out the gap openers.

4. The ClicOn is in place.
Please read all of the instructions and look at the pictures before attaching the ClicOn.

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the frame surrounding the stereo, to widen the gap. Place the gap openers about 10 cm apart. Peel off the adhesive tape covers on the ClicOn.

2. Hook the angled edge on the upper part of the ClicOn over the frame surrounding the air vent.

3. Press the lower part of the ClicOn into the gap between the gap openers. Pull out the gap openers.

4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount