ClicOn No Holes Dash Mount for Mercedes Benz V-Class Vito 04-14

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653364
 

ClicOn Centre Mount for Mercedes Benz V-Class Vito 04-14

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Mercedes Benz V-Class 04-14
Mercedes Benz Vito 04-14




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

Not for Vehicles with Opening Compartment on Top of Dashboard

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the panel surrounding the display to widen the gap. Place the gap opener as far to the right as possible. Slide the gap opener 10-15 cm leftwards in the gap. Peel off the cover of the adhesive tape on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap next to the gap opener. Flip the ClicOn downwards, towards the air vent,so the angled edge on the upper part of the ClicOn hooks behind the panel surrounding the display. Pull out the gap opener.

3. Hook the lower part of the ClicOn, with adhesive tape, under the upper edge of the air vent.

4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

Not for Vehicles with Opening Compartment on Top of Dashboard

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the panel surrounding the display to widen the gap. Place the gap opener as far to the right as possible. Slide the gap opener 10-15 cm leftwards in the gap. Peel off the cover of the adhesive tape on the ClicOn.

2. Press the angled edge on the upper part of the ClicOn into the gap next to the gap opener. Flip the ClicOn downwards, towards the air vent,so the angled edge on the upper part of the ClicOn hooks behind the panel surrounding the display. Pull out the gap opener.

3. Hook the lower part of the ClicOn, with adhesive tape, under the upper edge of the air vent.

4. The ClicOn is in place.

Contains 1 x vehicle specific dash mount