ClicOn No Holes Dash Mount for Suzuki Cruze 04-09

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653357
 

ClicOn Angled Mount for Suzuki Cruze 04-09

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

Fits:

Subaru G3X Justy 04-07
Suzuki Ignis 04-09




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the cover of the adhesive tape on Part 1.

  • 2. Press the angled edge on Part 1 into the gap below the gap opener. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the stereo and the adhesive attaches to the frame surrounding the stereo. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriwer (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

This ClicOn consists of two parts.
Part 1. Attching part (the smallest part)
Part 2. ClicOn face plate

  • 1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the cover of the adhesive tape on Part 1.

  • 2. Press the angled edge on Part 1 into the gap below the gap opener. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the stereo and the adhesive attaches to the frame surrounding the stereo. Pull out the gap opener.

  • 3. Open up the predrilled holes in Part 2 with a screwdriwer (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw straight into Part 1, in the same angle as Part 1.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount