ClicOn No Holes Dash Mount for Ford Explorer 02-05

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653256
 

ClicOn Centre Mount for Ford Explorer 02-05 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn. Note: The ClicOn can be attached on either side of the air vent. The instructions below apply for both placements.

  • 1. Press the thick end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Press the angled edge on the upper part of the ClicOn into the gap next to the gap opener. Pull out the gap opener.

  • 3. Press upwards and forward on the lower part of the ClicOn so the grooved edge hooks over the air vent edge. Press down on the inner side of the ClicOn to make sure the grooved edge snapped properly into place. Adjust the air vent.

  • 4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn. Note: The ClicOn can be attached on either side of the air vent. The instructions below apply for both placements.

  • 1. Press the thick end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Press the angled edge on the upper part of the ClicOn into the gap next to the gap opener. Pull out the gap opener.

  • 3. Press upwards and forward on the lower part of the ClicOn so the grooved edge hooks over the air vent edge. Press down on the inner side of the ClicOn to make sure the grooved edge snapped properly into place. Adjust the air vent.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount