ClicOn No Holes Dash Mount for Mitsubishi Lancer 02-07

Out-of-Stock: Normal lead time: 2 weeks

$48.99 (Incl. GST) ACC-DM 653253
 

ClicOn Angled Mount for Mitsubishi Lancer 02-07 Not the product you are looking for? Go to http://www.strike.com.au/products/dashmounts to start again




This ClicOn Dash Mount allows the user to connect their cradle their dashboard without the needs for drilling holes. They are car specific. They can be used with the full range of Strike Alpha Car Cradles & Holders see http://www.strike.com.au/products/Strike-Alpha-Car-Cradles

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the air vent panel frame, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Press the grooved edge on the upper part of the ClicOn into the gap next to the gap opener. Pull out the gap opener.

  • 3. Press the thin end of the gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Press the grooved edge on the lower part of the ClicOn into the gap above to the gap opener. Press firmly forward until you see or hear/feel it snaps into place. Pull out the gap opener. If the center console panel frame has popped out, press it back in again.

  • 4. The ClicOn is in place.

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn.

  • 1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the air vent panel frame, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.

  • 2. Press the grooved edge on the upper part of the ClicOn into the gap next to the gap opener. Pull out the gap opener.

  • 3. Press the thin end of the gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Press the grooved edge on the lower part of the ClicOn into the gap above to the gap opener. Press firmly forward until you see or hear/feel it snaps into place. Pull out the gap opener. If the center console panel frame has popped out, press it back in again.

  • 4. The ClicOn is in place.
Contains 1 x vehicle specific dash mount